ArduplaneNG v2.4 now on AIOP v1.0
I have just done a successful porting of the ArduPlane v2.4 to the AIOP v1, so it is now called ArduPlaneNG v2.40
All things are working well...
I have used:
- a Mediatek MT3329 GPS
connected to RX2,TX2 from the S1-S3 plug and powered by the I2C plug (+5Vdc, ground)
- a airspeed sensor MVPX7002DP
connected to A0 from the A0-A5 plug and powered by the I2C plug (+5Vdc, ground)
- a turnigy receiver 9X8Cv2
This has been fully tested with the AP mission planner 1.1.96 mavlink 1.0
soon tested in flight on a Easyglider... Stay tuned...
see photo attached: