View Single Post
Old Jul 09, 2012, 07:51 PM
Chuchuf is offline
Find More Posts by Chuchuf
Carboweave, Ask For It By Name
United States, GA, Atlanta
Joined Aug 2009
1,555 Posts
Thanks Eddie P.
Fuse is held together with 4 cam lock fasteners (you can see one in the last picture) that engage the head of a allen head bolt that come with the kit. There are also 4 guide pins for alignment that slide in next to the bolts.
They were already installed to the front fuse bulkhead or I wouldn't have used them. There are better ways to do this that I have seen but I didn't want to redo the mounting. I'll look for something that can cover the 4 holes for he camlocks.
I guess the nice thing about the camlocks is that they allow you to finely adjust the tension on them with the bolts.
Mounting the horizontal stabs and vertical stab next, and then more sanding on the main wing tomorrow and then start to cover the wings with 3/4 oz fiberglass cloth and West resin.

Chuchuf is offline Find More Posts by Chuchuf
Reply With Quote