View Single Post
Old Jul 09, 2012, 04:30 PM
Chuchuf is offline
Find More Posts by Chuchuf
Carboweave, Ask For It By Name
United States, GA, Atlanta
Joined Aug 2009
1,556 Posts
Moving right along.
The stabs, elevators, rudder, ailerons and flaps have been glassed with West System and 1/2 oz cloth.
The servo covers have been made from 3/16" lite ply and servos mounted.
Now comes the cleaning up of the seam where the front and rear fuse joins together. To do this it was a two step process, first the front seam and then the rear of the seam. What I used was West Syetem Epoxy resin mixed very thick with micro baloons and cabisol for thickness. Once the front is done, sand and lay up the rear. Wax paper was put in the seam each time so that it would separate. Then sand the rear part/
First coat of primer and pictures.

Chuchuf is offline Find More Posts by Chuchuf
Reply With Quote