View Single Post
Old Jul 06, 2012, 07:08 AM
dcame002 is offline
Find More Posts by dcame002
Lipo Burner
dcame002's Avatar
United States, FL, Sunrise
Joined Mar 2012
811 Posts
Quote:
Originally Posted by jim350 View Post
As has been documented throughout this thread alot of items on the zephyr either require glueing or have insufficient glue.

I found that the aileron servo covers, aileron servos are not glued from factory
The plastic part at the front where the wing attaches needs extra glue. Also reinforcing in the area the wing pins attach to the wing is required (i filled with hot glue)
Where the wings bolts connect is not glued in (purely captured in the foam. Rips out after one non perfect landing)
Quote:
Originally Posted by F4J Denny View Post
Maidened mine this morning with a ThunderPower 3800 45c 3cell. Cg was around the 80 mark and she flew great with only a few clicks of up elevator. Nice flying plane. Second flight was even better with the pland being trimmed out. Here is the maiden video my friend took with his little keychain camera. Best viewed with full screen and HD. Tomorrow I will have a better camera so she wont look like a little dot in the sky.


http://youtu.be/ma67d838luI
What field is that. Looks like Davie.
dcame002 is offline Find More Posts by dcame002
Reply With Quote