Originally Posted by SZD16
I'm also going to redo the stab mount and take the rear most bolt out...the one under the fin...and replace it with a pin so the stab/elevator can be removed without taking the fin/rudder off.
I would advice against this. Because of the conical shape of the recess in the underside of the stab and fuselage you would have to cut off a lot of material in order to be able to slip the horizontal stabilizer under the front of the vertical stabilizer. Guess how know. I had to build everything back after trying to do the same.
The only way this works is taking off the bottom front angle of the vertical stabilizer, leaving an ugly opening when everything installed.