View Single Post
Old Jul 02, 2012, 03:51 AM
neo__04 is offline
Find More Posts by neo__04
Registered User
Australia, VIC, Warrnambool
Joined Feb 2012
176 Posts
Discussion
TX battery help - Eurgle 9x & Dragonlink

Hey all,

I have an eurgle 9x radio and have been using a life 1500mah 9.9v battery from new. It works fine. No complaints.

I now have a dragonlink UHF running off the pins when i remove the 2.4ghz module. It works fine too.

But im looking at getting the best battery solution for running these two.

I have read some people use a 3s lipo, turnigy have 2650mah packs, some say great, some say too much voltage. I've also read some people use sanyo eneloop nimh packs too, much safer and still 2000-2500mah.

What battery do u guys recommend using to run the TX & Dragonlink.. Id like the longest lasting option between charges, so as to not run into unexpected dramas in the field.

Thanks in advance
neo__04 is offline Find More Posts by neo__04
Reply With Quote