Originally Posted by B dog
It's listed as a EPP safe glue but its flexible. The control devises need to be firm/solid so my damage control is not just adding weight but is incorrect again for the correct solution if there is one. I'm just going to stop now and wait for your advise.
PS I did stress test the improperly glued peices and they held just fine, unlike my elevator fail where it just came off easily.
Beacon's Foam Tac is an excellent glue for foam but it's a contact adhesive where airplane part A and airplane part B have glue applied to contact surfaces, let skin and then press together. Once dried the foam will tear apart before the glue fails. However, it could also be used as "Tacky" glue as well. So, you might be fine goobering up the joints.