Thread: Build Log Windrider's Boeing 737
View Single Post
Old Jun 21, 2012, 09:32 PM
DerekB is offline
Find More Posts by DerekB
Registered User
DerekB's Avatar
Cape Coral, FL
Joined Nov 2001
1,910 Posts
Originally Posted by Pannoch RC View Post
Dry fit and operation of the spoiler system designed by Doug.

Having a break from the wings so started the next section - The Spyro nose wheel door mod. Its works very well.

Thanks to all the input This thread is so full of useful tips and information.

The spoilers are looking very sharp! When they are up, it will expose the flaps and look really cool and show off how the flaps are really hanging out there.

One tip someone told me was to reinforce the nose gear mount - add a hard wood spar, about 2" to 3" long on each side, right above the plywood plate. I never got any photos of mine. Just cut a slot in the foam right above the plywood and glue in the spars, then the plywood plate will glue to those spars, as well as the foam.

Did you recess the nose gear to get the wheel all the way up into the well? If so, how did you compensate to keep the plane level on the runway?

DerekB is offline Find More Posts by DerekB
Reply With Quote