Thread: New Product Hobby King EPP FPV plane
View Single Post
Old Jun 18, 2012, 05:07 PM
TheCure is offline
Find More Posts by TheCure
Wats the worst that can happen
TheCure's Avatar
Canada, BC, Surrey
Joined Jan 2009
573 Posts
As a followup I've found my tail is slightly angled differently that the wings/fuselage.
I've glued the tail wooden mounts using CA onto the boom. Evidently I was quite thorough with the glueing too.
Any way to dissolve the cured glue?
chipping away at the edges still does not remove the glue i cant reach between the inner mount and the boom.

UPDATE:I chipped away at the glue, and then used the vice grips to slightly bend the wood and crack the bond. its now ready for the proper angle.

and just to confirm... i should be shimming the motor mount closer to the boom to adjust for the diving problems I had under power?
TheCure is offline Find More Posts by TheCure
Last edited by TheCure; Jun 19, 2012 at 01:05 AM.
Reply With Quote