View Single Post
Old Jun 17, 2012, 10:19 PM
IntegrityHndywrk is offline
Find More Posts by IntegrityHndywrk
IHW Heli Division
IntegrityHndywrk's Avatar
United States, FL, Palm Coast
Joined Mar 2012
8,574 Posts
Build Log
V120D05 CS-PRO - Upgrades, repairs, Modifications

Ok, I am starting this build log to start getting some of my D05 info and pictures together. Since i didn't take that many pics when i did the initial upgrade to the D02S parts I will touch on it some here where I had to change out the heli's air frame because i broke the RX shelf off. There will also be a modification to strengthen the air frame as well as some other tips and tricks.

Click here to Subscribe to this build log!

Topics covered in this log so far:

V120D05CS-PRO Air Frame Durability upgrade.

V120D05CS-PRO Landing Skid Upgrade

V120D05 Extreme tail fin set

V120D05CS-XTR Extreme Spin 16,300kv Motor Upgrade

0.032 Aluminum Stock/wire Sheer pin

Sheer Pin - 22 AWG Copper solid conductor

V120D05CS08-Pro - HP08-S 16,500kv Motor Upgrade

Latest Flight videos - 01-28-13

Upgrade to 3S (Basic version with Xtreme skids)

V120 3S battery mounting with Xtreme skids

D05 Custom upgrade (silver) tail boom

Crash repair - Main gear hub & front RX tray frame

V120 CF upgrade airframe add on

M120D01 Skids - Weight Shaving

Mounting GY280 and Talon 15 in V120 upgrade frame

3S CF Battery Tray Mod for V120 upgrade frame

Lynx fiberglass Goblin style canopy on V120

Xtreme 130X Canopy post mod for V120 series

V120D05 Main rotor and shaft upgrade to D02S parts:

These are all parts off of the v120d02S model heli used for this upgrade to CS-PRO.

HM-V120D02S-Z-26: Receiver (RX2622V - Compatible with WK Series Radio )

However there is of course the 2622V-D and the newest version just released with the 6 axis gyro to consider as options.

HM-V120D02S-Z-01: Main Rotor Blades
HM-V120D02S-Z-02: Blade Grips
HM-V120D02S-Z-03: Rotor Head
HM-V120D02S-Z-04: Main Shaft
HM-V120D02S-Z-05: Feathering Shaft
HM-V120D02S-Z-06: Ball Linkage Set
HM-V120D02S-Z-19: Bearing set for Walkera V120D02S
HM-V120D02S-Z-20: Main Shaft Bearing
3 Ball joints from the v120D02S to replace the ones on your current servos. (you can get them of the D02S tail rocker arms)

Below are pictures with comments on the frame swap and some other info about the upgrades and modifications.
IntegrityHndywrk is offline Find More Posts by IntegrityHndywrk
Last edited by IntegrityHndywrk; Mar 21, 2014 at 02:44 AM.
Reply With Quote