View Single Post
Old Jun 17, 2012, 10:37 AM
chilisoling50 is offline
Find More Posts by chilisoling50
Registered User
Joined May 2007
26 Posts
If I am not wrong the set up you have now is called Mode 1 with throttle on the right .
What I have done to change mine to mode 2 is by opening the back of the cover and remove the spring from the left side and put it back on the right side. This way the rudder will still have the spring actions( return to neural position after you push it once) and while the left stick is just sliding up and down.( becarefull which spring to remove_, you need to remove the spring that dictates the up and down motion of the stick ( for sheets pull in and out ) not the other one which control the horizontal motion one.
You will see a piece of ratchet at the right side now above the stick drum .
Just put it on the left side so it will do the same as before on the right side before).
If there is no Futaba ratchet there already. Yo can make one or buy it from Tower Hobby.
Good luck.. I do the same for all my Hitec Radio transmitter.
chilisoling50 is offline Find More Posts by chilisoling50
Reply With Quote