Thread: Build Log MK Skymaster 20 build
View Single Post
Old Jun 15, 2012, 12:16 PM
Generic Member is offline
Find More Posts by Generic Member
That's so classic you.
Generic Member's Avatar
United States, NC, Stokesdale
Joined Jul 2006
426 Posts
Quote:
Originally Posted by doxilia View Post
Makes sense. You wouldn't have built the fuse that way if they weren't. I guess it will be time to revisit the plans over the holidays. Hopefully I can get things finished up.

I attached a jpeg of the F3-F4 formers.

Have you settled on the etracts for the time being? You could always refit 602's later if you decide against the etracts. I'm pretty sure the rail width in the wings would be the same.

I'm going ahead with the Eflites.

What fuel do you plan to run? #8 plug? 8x7, 9x6? It's gonna be loud!

I'm going to use PowerMaster 15%, OS 8 plug, and a 8x6 MK Glass prop to break it in, then either the 8x7 or 9x6 MK Glass prop. I'm guessing the .25VF DF can spin the 8x6 well over 18K. Loud? Yeah, and FAST!


Yea, the white balance looks a little off. Maybe not a great sensor. Some of the phones take great pics these days but they cost more than actual cameras. The Canon and Sony cameras have good sensors - nice warm colours.

Are you building on cork on a glass top? The material under the fuse looks unusual.

My bench is 3/4" ply with 1/2" glass. I have a pressed fiberboard (ceiling tile) on top.

David
Response in blue.
Generic Member is offline Find More Posts by Generic Member
Last edited by Generic Member; Jun 15, 2012 at 02:11 PM.
Reply With Quote