Thread: Discussion Multiplex Fun Cub
View Single Post
Old Jun 15, 2012, 08:02 AM
Starving Bushman is online now
Find More Posts by Starving Bushman
Registered User
Starving Bushman's Avatar
United States, VA, Alexandria
Joined Nov 2011
529 Posts
I am trying to, but do not yet, understand the whole electrical "equation" to ensure a good setup. So I am seeking advice for the best prop for this motor. I have a bigger motor that I will put on the Fun Cub later but I was going to start with this one..........

Turnigy D3530/14 1100KV

Spec.
Battery: 2~4 Cell /7.4~14.8V
RPM: 1100kv
Max current: 22A
No load current: 1.6A
Max power: 315W
Internal resistance: 0.077 ohm
Weight: 73g (including connectors)
Diameter of shaft: 5mm
Dimensions: 35x30m
Prop size: 7.4V/12x6 14.8V/8x4
Max thrust: 1100g

I have 3s 2200mah batteries to use with it so maybe a ?????

I have a watt meter to test but I don't want to just go buy 10 props not knowing what I'll use so any guidance would be appreciated.
Starving Bushman is online now Find More Posts by Starving Bushman
Last edited by Starving Bushman; Jun 15, 2012 at 08:09 AM.
Reply With Quote