Originally Posted by cassb
Everything works OK until I turn off the transmitter. When I turn it back on again, it won't reconnect to that receiver any more until I go through the bind process again.
One weird thing about the Tx ... the green light on the back where the bind button is on the DX7 -- when I turn on the Tx, that light flashes for about 3 seconds then goes off. Isn't it supposed to be on solid?
After you have bound the RX = light on solid
Turn radio and RX off, yes then both need to be turned off
remove bind plug
turn radio on
turn RX on
it should work for that