Originally Posted by ajbaker
1. Ok. To make sure we are all on the same page, please repeat your question again.
2. Yes. Absolutely. If you have to rebind your receiver every time you use it, something is very wrong. Usually, you only bind a receiver to an xmitter once. It should hold the bind forever. Call for service.
He's missing a step. The bat/bind are in the same slot.
step 1.Put bind plug in batt/bind slot.
step 2. plug in battery in to esc,
.hold bind switch while turning on power to transmitter. dx5/ dx6i, trainer switch, dx7 and up,bind switch is in the rear, wait for the rx to blink rapidly, untill it is one solid coulour, that means it is bound., but before you bind, make sure your trimmed out EVEN on the tx