View Single Post
Old Jun 12, 2012, 08:04 AM
Edwinzea is offline
Find More Posts by Edwinzea
the answer 42 is
Switzerland, AG, Lenzburg
Joined Jan 2006
1,911 Posts
Hey Curtis, thanks again for all the info. I will make some test soon

yes they are reusable, I cover them with packing tape, the tricky part is to get a sharp angle between the mold and the partition board, this time I used Cristal tape for the edges. I used a thin pencil to push it to the edge. Once everything is covered with tape I applied two coats of demolding agent, I made other pods this way and it works flaw less. Actually the pics are after release so you can see the are still shinny

the tricky point is after joining, you have to cut the excess with a dremel disc and the sand it to shape and finally apply a reinforcing strip of GF or kevlar. After that putty, filler, sanding until the fuse is ready to primer and paint

EZ
Edwinzea is offline Find More Posts by Edwinzea
Reply With Quote