Thread: Discussion New Spektrum DX7S.........
View Single Post
Old Jun 09, 2012, 07:27 PM
freechip is online now
Find More Posts by freechip
Air, Ground & Water
freechip's Avatar
Canada, ON, Rockland
Joined Aug 2008
26,836 Posts
Don't use zero percent. Use 29%, if you use 0% it still works but if you look at the servo monitor the throttle channel will be moving past low throttle. In some case when you are using an esc that learns low throttle on power up and if you have the throttle cut active the esc will learn the lower position and when you toggle off the throttle cut the motor will start spinning.
freechip is online now Find More Posts by freechip
Reply With Quote