Winner's Model 48in Extra 330LX SEPP - stiff EPP plane with airfoiled tail surfaces
A few days ago I found out about a new 48" EPP plane that has me really excited! It's the Winner's Model 48in Extra 330LX SEPP plane and it has some novel features for this class of plane, such as airfoiled tail surfaces and ball link pushrods. Mr. Frank (Caihong) Lui, the owner of Winner's Model, posted some info about this plane on the thread for his smaller 37.5" Extra plane, so I copied his comments to this new thread that I have created.
"Hey guys, This is Frank Liu/Caihong liu from Winner's Model, the designer of the Extra EPP foamie and the owner of www.3d-fly.com
Thank you all for the interest and comments for our airplane kits. Now we have another good news that we are going to announce our new 48in Extra330LX which tail wing is also air foiled and will come with carbon fiber and ball bearing push rods(Showed as the attached pictures). I think the 48in Extra330LX is strong not only for maneuvers like knife edge, inverted harrier, but also for those maneuvers which need strong structure such as blender, snap rolls, the upright harrier is quite stable as well, you may have seen its performance for those maneuvers in the videos.
48in 330LX is designed to fly with 3S 2200mAH battery, and it is the size I flew in those videos. The flying weight with 3S 2200 battery is 1200g. And I have also tried 4S 2200 battery, it was alittle bit heavier but much more powerful, the performance is awesome too.
My setup for your reference:
Motor: 3542/940KV 450W brushless outrunner.
ESC: Hobbywing 40A
Servo: Hitec 65MG*4pcs
Prop: APC 13^6.5E
Battery: Fullymax 3S 2200mAH 25C
If there is any question about us or our airplane kits, please kindly send email to us at: email@example.com
. Many thanks!
You may contact www.milehighrc.com
for our products.
Update 20 July 2012: I added an English language instruction manual as a file attachment below.
I attached some links to videos on Youtube to the second post, so check those out.