View Single Post
Old May 27, 2012, 07:41 PM
KC10 CC is offline
Find More Posts by KC10 CC
Registered User
KC10 CC's Avatar
United States, NJ
Joined Nov 2011
86 Posts
Originally Posted by idletime View Post

She's flying...just turning down the rates did it.

@mgbolts.....Let me know how the rudders turn out - and what servos you are going to use.

Things I learnt:

1) there is a power delay between throttle (on TX) and motor winding up - don't launch (hand throw) till you feel the plane pulling out of your hand - DUH.

2) Standard batteries (like my 20C) can't deliver ampage !!! My DX8 telemetry warning goes off - voltage too low every time I try above 1/2 throttle for more that 5 seconds. Gotta get some nano-tech 65C or something.

I'm using a Turnigy 2836 -2350kv on with a 6x4 prop.
Hey, I'm running the same setup with 4s 2200 45-90c and this thing hauls a$$! 1050 watts at 60amp. It's double the rating of the motor but it only comes down warm and so far so good after 50+ flights.

Rudders are a good addition. They aren't that effective with yaw control but they do allow for some crazy flat spins and are awesome as speed brakes to slow this beast down.
KC10 CC is offline Find More Posts by KC10 CC
Reply With Quote