: New Product
THE WINGS MAKER TWM .... J11B twin EDF Chinese Fighter Jet
View Single Post
May 25, 2012
, 11:37 PM
Joined Apr 2009
Hey I have Twins!
HET 2W-25's(2720kv) mounted in E-Flight Delta V-15 Housings, CS-10 Fans, Extreme-RC 3.17 Shafts(I like these shafts not only because of the nice snug fit but because he's drilled hole near the end of the shaft which makes tightening the fan blade SO much easier) & Extreme-RC Precision Allow Spinners.
I'm using the E-Flight housings because they're more rigid than the CS housings plus there are spaces cut out of the motor mounts which are designed to keep inrunners running cooler. I 'll run this setup on 4S & mainly 5S.
I was originally thinking about running 6S with E-Flight BL-32's but since I already had the 2w-25's and plenty of 5S lipos I decided to go this direction.
View all Images in thread
Front view Delta V-15 Housing, CS-10 Fan with Extreme-RC 3.17 Shaft Adapters & Alloy Spinners
Rear view of the 2w-25's before installing the Heat Sinks. Notice how the Delta-V Housings have cut outs in the center of the motor mount area for additional cooling!
In the J11B before heat sinks
With heat sinks
Front view of J11B Intakes & new SU-35 Front Nose Cone & Retract. These Oversized Intakes should work well with the Air-Starved CS-10 Fans.
The Extreme-RC alloy spinners really finish it off.
Last edited by RugFlyer; May 29, 2012 at