Originally Posted by Skeletool
I've also noticed that the servo monitor doesn't always reflect reality. When I was tring to figure out the throttle lock funciton I used the servo monitor, but the servo bar graph moved up and down even though the throttle lock was on. When I tried it on the plane, the throttle lock held the throttle position.
Transmitter MUST BE TRANSMITTING for it to work. It doesn't matter if you use a switch or the screen icon to lock it. Throttle indicates no movement when throttle lock activated "during" transmitting. If using a switch or the screen, the throttle lock screen icon/indicator will not become active if you are not transmitting. I don't believe this feature/function is referenced in the manual, but has been mentioned previously.