View Single Post
Old May 24, 2012, 03:58 PM
magnuts is offline
Find More Posts by magnuts
Registered User
Adelaide, South Australia
Joined Feb 2007
359 Posts
Originally Posted by Chris Nicastro View Post
Wow that full size cable looks like a bent spoke on there! Are you sure its not affecting the steering? Did you go to a thicker damper oil?

I'm looking at messing around with some 4WD SCT motors from Tenshock on the MM450. These are 4 pole motors so the torque is a lot more than your standard motors. They have a 5200KV motor I want to run that will be pretty fast I bet. I'll run a 100A ESC along with it too. Im also looking at 3500KV on 3S.
The problem is the 5mm shaft. I need to find a pinion that will work or try to turn the motor shaft down.
When I was putting it together, I put the liner into the keeper on on the fork leg, and as I was bending the cable down toward the brake servo, I was watching the headstock, it did not move.
I do need to put thicker oil in the steering dampener anyway, because I only had 25w at the time, really need 35 to 40w
magnuts is offline Find More Posts by magnuts
Last edited by magnuts; May 24, 2012 at 03:59 PM. Reason: poor grammar
Reply With Quote