View Single Post
Old May 05, 2012, 04:36 PM
bill34207 is online now
Find More Posts by bill34207
Redneck Injuneer
bill34207's Avatar
Bradenton, Florida
Joined Aug 2007
6,980 Posts
Thanks Phil. I was thinking you said you got around 5 minutes somewhere along the line. I only have to make 4 minutes for Q offshore here. (And at our local club races only around 2 minutes for the 6 laps we usually run).

I'll most likely disable the bec on both of them (slide the red wire out of the servo end) and run a rx pack or seperate bec. Just depends on whether I need some ballast. I only disabled the bec in one of the esc's in my little MM twin since it's only running 4s so one feeds the radio and the other is just along for the ride.

Looks like I need to add a few photos to this pictureless page.
I have gotten as far as adding a couple layers of CF cloth to the area's where the motor mounts will go and making a working template for making the mounts. Already have the front hatch hold down tabs installed as well but didn't bother with shooting it.
bill34207 is online now Find More Posts by bill34207
RCG Plus Member
Latest blog entry: Freewing 90 mm Super Scale F-16
Reply With Quote