View Single Post
Old May 01, 2012, 09:23 AM
rc4life85 is offline
Find More Posts by rc4life85
Trader Rating: 11
Registered User
Joined Feb 2012
19 Posts
Trader Rating: 11
ok will do so thanx for the tips my friend
Quote:
Originally Posted by thesoulcrusher View Post
do you mean the setup for the Micro T's ? I would strongly reccomend not using their ESC, it is horrible, the motor gets no power at all, its the same speed as brushed. I used a hobbywing 25A Esc instead and it was WAY better. They are only $23 on hobbypartz.com http://www.hobbypartz.com/ezrun-25a-...or-rc-car.html

I heard there are motors on hobbyking.com that fit too and are much better.. the losi micro motors are junk! the wires are poorly soldered and they come loose all the time,. I had to epoxy my wires.. Hope this helps!
rc4life85 is offline Find More Posts by rc4life85
Reply With Quote