Originally Posted by michaeljohng
Which tail motor set did you use to give the tail DD?? im looking at doing the same mods you have, but im also replacing the pcb with a walkera board/receiver that i had from a century evo 180
any info would be greatly appreciated so i choose the right motor.
michaeljohng - here's the link to the site that I purchased the CB180 DD motor. I purchased the $18.99 kit, but would suggest buying the DD Carbon Brushed moter ($9.99) and the DD Prop ($4.99) instead of the kit, if you want to save a few bucks. You don't need the tail boom in the kit.
As for the installation, I modified the existing tail boom, buy cutting off the plastic gear, using a dremel, removed the old motor and replaced the motor with the new 180 CB. Closeup pic enclosed (flew it into a bush last week, so it's a little scratched up.....repairs in progress.
Note: In my previous posting once you install the motor, you'll need to increase the linkages by approx ~2mm to compensate for additional weight.