Originally Posted by Jelico
I have mine - put the frame together fairly easy in about 3 hours last night. Now just have to install my electrics etc. For those that are interested this is how I am planning to run mine:
4x Sunnysky 2814 870 KV motors
4x DJI 30A Opto ESC
4x APC 12x3.8 props
DJI NAZA FC
Futaba FAAST rx
HK 5V Ubec
Home made power distribution harness
Immersion RC 5.8GHZ FPV setup
3x Zippy 30C 4S 5000MAH batteries
2x Hobbyking HK401 gyros
2x Turnigy MG 930 Servos
NEX 5N with 16mm lens
Instructions leave a lot of information out but if you have build a few helps/multis before you will be fine.
Hoping to have mine flying by the end of the weekend - will let you guys know. So far I am REALLY impressed with the service and quality of the kit. This is really good value for money if you ask me.
I'd love to see some vid taken from your bird when she's up and running! Keep us in the know about how it all turns out if you can! I think you'll be the first guy outside the guys working on this product to have any input! Can't wait to hear more!
Keith Frikkin' Morris