Thread: Build Log Neos
View Single Post
Old Apr 17, 2012, 02:14 AM
ThomasLee is online now
Find More Posts by ThomasLee
Team Hong Kong F3K
ThomasLee's Avatar
Hong Kong
Joined Sep 2010
3,728 Posts
Enjoy the build, Art
The Atx 802's should fit flush at the specified location.
We are using a slightly different bagging technique on our feathers that don't need us to sand the LE and still maintain the correct shape. We will check with the templates again and see if we need to change something during the bagging process or do some post-processing.

For everyone building the kits, please look at the vertical carefully. The planform is symmetrical, but the airfoil is not! It's a little hard to tell, but if you take a look at about 50% of the foil, it is a bit more obvious. Please have the 'top' of the airfoil pointing towards the throwing blade side.

Thanks for the tip Russ, I'm actually back in Vancouver already, so won't be able to pick any up from the SASS guys. IIRC one of the local hobby shops have some CF and FG, so I'll head over tomorrow and see if they still do.
ThomasLee is online now Find More Posts by ThomasLee
RCG Plus Member
Last edited by ThomasLee; Apr 17, 2012 at 08:45 PM.
Reply With Quote