Originally Posted by clearprop88
1-Are your tail blades rotating counterclockwise?
2-Is the leading edge of each tailblade set to rotate CCW?
3-When you give a right turn command does the tail slider move to the left?
4-When you manually rotate the heli to the right does the tail slider move to the right?
The correct answer to these questions is YES. If they are yes then the problem is probably the servo.
If any answer is NO then you have to make the necessary corrections so that all the answers are YES.
Check the servo reverse setting, and be sure it is correct.
Are you using the stock tail servo? If so then the answer to 4 should be yes.
Thanks, I'll try these testing.