Originally Posted by Torch8
Got tail issue. Heli spining in circles?
- Tail servo horn is at 90 degree and goes back to 90 at rate mode.
- Tail grips and tail blades at zero pitch
( At rate mode tail goes back to center at zero pitch)
( At HH mode tail doesn't go back)
Not sure what to do at this point.
1-Are your tail blades rotating counterclockwise?
2-Is the leading edge of each tailblade set to rotate CCW?
3-When you give a right turn command does the tail slider move to the left?
4-When you manually rotate the heli to the right does the tail slider move to the right?
The correct answer to these questions is YES. If they are yes then the problem is probably the servo.
If any answer is NO then you have to make the necessary corrections so that all the answers are YES.
Check the servo reverse setting, and be sure it is correct.
Are you using the stock tail servo? If so then the answer to 4 should be yes.