Originally Posted by jglover
Im running a Turnigy SK 3536 1400kv motor with a 50A ESC and a 3S 5800mah battery I did notice on my last recorded video, that at full throttle, she was pulling about 52A. Crusising, she'd pull about 26-30A. My servos are the Hextronixs 9 gram and I have them set to move to 140% on the Futaba
The RX is a Futaba R168DF 72 Mhz.
Sounds like your sending this big heavy Truck of a plane up with something like 500 bucks plus of hardware (depending on how sophisticated your setup is) and all this depending on 10 dollars worth of servos (ten dollars total!!!!) ........
I wouldn't dream of doing that ......