View Single Post
Old Apr 13, 2012, 09:55 AM
branded7K is offline
Find More Posts by branded7K
Wyatt Earp
USA, AZ, Kingman
Joined Jun 2008
24 Posts
Thanks Charlie, I think I'll disassemble the 2-rotor hub and try the cellophane tape. Good idea with the dual shims! That method not only gives you more positive positioning, but gives you more glue area under the upper hub. Anxious to hear how the 6mm hub plates work for you. I still have the 3-bladed rotor ready for the maiden as soon as the weather cooperates. Steady winds at 25-30 mph, with gusts to 60! I've set the gyro up with a 1200Kv BW, 3S 460 mah battery and a GWS 9040 prop. Esc is a 20-amp Power Up from Heads Up RC. Thanks again for the advice and looking forward to your flight report with your new setup! - Wyatt
branded7K is offline Find More Posts by branded7K
Reply With Quote