Originally Posted by vic20owner
Regarding those with weird flying issues, remember your pitch and roll gains will be slightly different.. this quad is wider than it is long.
Also, if you are having strange issues, make sure your ESC's are all grounded together at the signal leads... some esc's work fine with just signal, but other require both signal and ground to work correctly.
Also, enable autolevel for the first few flights... this will help you get flying and you can get an idea if it's a motor/esc issue or just a gains issue.
Maybe folks can post some screenshots of the Copter Control Stabilization panel. Since we all have the same frame and similar parts it would probably help some of us. I'm just flying in Altitude mode and I can't get it from pitching forward. I'm playing with the AccelBias setting since I just reset the board completely.