Thread: Discussion Hobby King Ryan STA EPO
View Single Post
Old Apr 09, 2012, 08:16 PM
RCAV8T0R is offline
Find More Posts by RCAV8T0R
Feeding the RC Addiction
RCAV8T0R's Avatar
United States, CA, San Diego
Joined Apr 2011
586 Posts
Interested in Ryan Mods...

Originally Posted by 4x4rc View Post
As for securing the battery I use a 4" long 3mm CF rod that I poke down vertically through a hole in the top of the fuse into a hole in the bottom. It secures the battery in its location by not allowing it to slide out backwards. Cheap, simple, works.

I didn't like the ESC floating around in there either so I relocated it to the front under the cowl, see an earlier page in this thread for a pic. Also moves the CG forward a bit.

I'll try and get a pic of the reinforcement rod on the elevator for you.
I've seen your previous posts & along with the rest. It looks like some front end mods are now in order, mainly cutting a notch in the nose area to relocate the ESC up front. I'm definitely interested in your CF battery restraining rod. Please post a photo. Thanks...
RCAV8T0R is offline Find More Posts by RCAV8T0R
Reply With Quote