View Single Post
Old Apr 08, 2012, 07:52 AM
dzwiss is offline
Find More Posts by dzwiss
Registered User
USA, NY, Poughkeepsie
Joined Jan 2008
83 Posts
In the Set-up Client, when you program the 3-way switch for switching between GPS functions, make sure when you set the EPA percentages on the switch for Position Hold and Return to Home, that Auto Level must be checked also. So when the switch is in the center position, Position Hold and Auto Level both should have check mark....When the switch is in bottom position, Return to Home and Auto Level should both be checked. This is not documented in the manual. I have discovered if the EPA percentages are not adjusted enough, Auto Level will not engage. You must adjust the EPA until Auto Level box is checked as well as Position Hold and Return to Home at the appropriate switch positions. Also when setting this up, make sure the Auto Level switch on your transmitter it set to off. I hope my explanation makes sense.

David
dzwiss is offline Find More Posts by dzwiss
Reply With Quote