Unrealistic's HEXorcism 600 - Luis & DiaLFonZo-Copter
I am Steven and I am starting the build of a big Hexacoper for photography and video.
My last experience with RC is quite a few years ago, but I think I will manage.
Because I want to be able to carry bigger camera's (550D or bigger...
) and I want a really stable platform I am starting with a Hex.
I am going to put descriptions and pictures / videos of my build here as it progresses and hopefully you can give me tips on the way.
My part list so far:
- Hexorcism 600 by DiaLFonZo and Luis
- Spektrum DX7
- iMax B5
- Black Vortex FC board
- Sonar DYP-ME007
- Orange 6channel receiver + satellite
- 6V ubec voltage regulator for FC
- 6/7 iPower 2814Q motors
- 6/7 flashable 25A / 30A esc controllers for 5S lipo
(HK SS 60-70A / HK Redbrick 60A / Turnigy AE-45A ?)
- 2 x 5000maH 5S lipo
- 4 x Trex700 tail booms or 7 x Trex600 tail booms
I have a supplier in the EU for the iPower motors.
The esc's are a bit of a problem.
Not all of them are flashable and I want the SimonK firmware on them.
They have to be able to handle the 5S batteries.
Most of them are in backorder at HK.