View Single Post
Old Apr 05, 2012, 05:23 PM
EpoXi is offline
Find More Posts by EpoXi
Registered User
Joined Feb 2007
86 Posts
Went to our local hobby store today and got the thing I needed accpet the hinge tape because they were lack of it, hope to find it tomorrw somewhere else so I could finish the kit this weekend.

Wanted to ask you something about the tail assembly.
In the manual it says to first glue the stabilizer mount piece of wook to the boom,
whta they dont say is how far from the end of the boom to glue it?
The skecht at the end shows the way to fit the rudder but how far forward from it should I mount the v-stab?
Also, what should I use to cut the boom's lenghwise cut for the rudder?

Here is pictures of the wing: -EDIT and the servo holes that I made.
as you can see I heated the knife and just melted the foam - it was very east that way.
The finish is not perfect, but I will improve it.
The result is nice and I earned myself another trashed knife =]
EpoXi is offline Find More Posts by EpoXi
Last edited by EpoXi; Apr 05, 2012 at 06:24 PM.
Reply With Quote