View Single Post
Old Mar 26, 2012, 06:41 PM
askman is offline
Find More Posts by askman
Destroyer of G-10
askman's Avatar
United States, OR
Joined Jul 2004
10,108 Posts
if you look at the KK's test, biggest thing we do notice about the esc power ramp is this.

turnigy esc takes about 8 clock cycle to go from 0 to full throttle. which means for your 25% change, it take 3 cycles to effect full change. since the cycle is totally depended upon frequency, at 50 hz, 3 cyc is 60ms while at 400hz, it is 7.5ms. anything less than about 10% throttle change, it will happen in 1 cycle. Now, I believe simonk's firmware actually take this ramp out, which means power change is much quicker. I believe this is the biggest reason for better performance.
askman is offline Find More Posts by askman
Reply With Quote