View Single Post
Old Mar 25, 2012, 07:47 PM
frankg is offline
Find More Posts by frankg
Registered User
Joined Dec 2004
4,175 Posts
10. The remaining frames must be removed from the laser cut sheets. Carefully start placing the frames in their respective slots in the keel and stem post assembly. Once all the frames are installed invert the entire keel, stem post and frames assembly onto the building board. Line up the stem post center line over the drawn center line of the building board. Tack glue the foot of the stem post in position on the building board. Next take the left shear assembly and carefully install it into the shear line slots of each of the frames. DO NOT GLUE IN PLACE AT THIS TIME. Now assemble the right shear into the frame slots.
frankg is offline Find More Posts by frankg
Reply With Quote