View Single Post
Old Mar 23, 2012, 11:05 AM
3D-Novice is offline
Find More Posts by 3D-Novice
Registered User
Joined May 2006
262 Posts
Build Log
Prather Little Toni 40 F1 build log

Ok - Rick from the Electric High performance is building the QM15 version and making his electric
I am a nitro guy , and he gave me the confidence and drive to start building mine

so here goes ......

Looking at the wing and comparing his pictures , i have a feeling that the wing cores are not originals ( his wings were stamped with right and left ) where as as you can see mine are not

also the core cuts aren't as smooth , so i will probably need to fine sand the cores to accept a better bond with epoxy
i plan to use 0.6oz micro glass between the core and balsa with a strip of carbon , but waiting for that to arrive so in the mean time starting to fit the motor to the fuse

got to cut out the front with a dremel , so that the Rossi F3D motor will just snugly fit inside
Still trying to figure out how to cover the pipe that goes with this motor as I dont like the idea that the pipe will be visibly seen , might have t make a different cover that that which is provided in the kit

in and case here is some progress pics
open for any comments/suggestions

3D-Novice is offline Find More Posts by 3D-Novice
Last edited by 3D-Novice; Mar 23, 2012 at 11:28 AM. Reason: add pics
Reply With Quote