Thread: Sold Blue Sky RC Micro Quad
View Single Post
Old Mar 18, 2012, 01:55 AM
cryhavoc38 is offline
Find More Posts by cryhavoc38
Trader Rating: 195
Why didn't they run? A pass???
cryhavoc38's Avatar
United States, WA, Woodinville
Joined Mar 2007
8,260 Posts
Trader Rating: 195
Blue Sky RC Micro Quad

Built this for the heck of it, flew it twice in the house and just moving on to the next build.

Its equipped with all new parts that include
4 2000kv 10g Power Up 180 motors and prop adapters from

4 hobbywing flyfun 6amp esc's from

Blue Sky RC micro quad frame

True KK+ 5.5d board with LCD screen and is loaded with Mike Barton's XX firmware from
This board is the one with the power bus built in. I've soldered the speedo's and the battery cable to the bus.

Gens Ace 3s 1300 25c lipo

Nylon standoffs from and the nylon screws from the's micro hexa kit

Both the main power cable and the battery are equipped with an XT60 connector

You will want to replace the gemfan 5x3 props that are installed. I didn't care for them as they are pretty thin and flimsy. In this case, I think the GWS 5x3 props are stiffer. I will send this with the Gemfan props and a couple spare props.

You will need to balance whatever props you use and then perhaps tweak/tune the gyro's via the lcd screen and your transmitter.

No receiver will come with this unless you fly Futaba Fasst, and then I can include the Futaba 4 channel micro receiver for an addtional $25.

Price without the Futaba Fasst receiver is $115 shipped usps priority mail to anywhere in the CONUS, AK, HI and PR
with the futaba receiver $140 shipped.

Paypal with no fee to the buyer.

PM or email me with any questions
cryhavoc38 is offline Find More Posts by cryhavoc38
Last edited by cryhavoc38; Mar 18, 2012 at 02:08 AM.