Thread: Discussion TREX 800 AP heli for sale
View Single Post
Old Mar 10, 2012, 11:10 PM
Jelico is offline
Find More Posts by Jelico
Registered User
Joined Jul 2008
403 Posts
TREX 800 AP heli for sale

Posted here as there really isn't an AP classified section..

Due to a number of circumstances, I am selling my Trex 800 Aerial Video/Photography set up.

This is a plug in, set your radio up and fly machine. A lot of time and effort has gone into tinkering with this to make it fly smooth and true with minimal vibrations. Suitable for a commercial setup, this would pay itself off very quickly in the right hands.

Trex 800 Flybarless Complete ready to fly (inc all digital servos and 3GX flybarless controller etc)
Align 800mm Main blades, Edge 115mm Tail blades
Perfect Regulator CCPM
Rear boom mounted Carbon Battery Holders
470KV motor
Extended Carbon skids
2XPT Front mount camera gimbal
2 Sets of almost new 8000MAH 10S battery sets (2x 5S 8000MAH)
1 set of almost new 5000 MAH 10S Battery set (2x 5S 5000 MAH)
Receiver battery.
Spare 700 MX motor
Spare Caron and KBDD tail blades (I use the KBDD ones where the grass is long)
Canopy, Battery trays etc to turn it back into a 3D helicopter
Misc Spare bearings, main shaft, feathering shaft, 700 Tail boom, 700 Torque Tube etc.


Also available and can be negotiated into the deal:
Complete 1.3GHZ Downlink inc TX, RX, Canon SLR AV cable, AV screen and case
Futaba 7C 2.4GHZ TX and RX
Canon Live View gentled (for remote control of canon DSLR)
Canon 10-22mm Lens - in my option ion the best lens for AP
If required, I am happy to put the full package together as a ready to go AP setup (inc Canon 60D, Chargers, Transmitters for heli and mount etc).

I will also help with basic setup and support to get the new owner going. Complete part list and prices available, please contact me for this.

I am selling for USD $2,250 or NZD $2,700 plus shipping. Will dismantle, package and freight world wide at cost.

**please note I am in New Zealand, so shipping to the USA or Europe aint local. I am happy however to hunt around for the cheapest/best freight option and send it world wide.

CONTACT: jamiebarrow @
Jelico is offline Find More Posts by Jelico
Reply With Quote