: Build Log
A simple high quality 12Volt 100Amp Power Supply- Part1
View Single Post
Mar 03, 2012
, 08:39 AM
Joined Mar 2012
I have a few power supplies from a Compaq/HP SAN Array.
Part Numbers are:
The only thing I could find out about it is that it is a 499W supply.
Thanks to xandrios we now finally know how to start this PSU
(and keep it running for more than 7 minutes).
- connect Pin 16 upside to ground
- connect Pin 22 upside to ground
- connect Pin 24 downside to ground
- connect Pin 18 upside and Pin 19 upside to each other
Pins 1-13 upside are 5V
Pins 25-36 downside are 5V Return/ground
Pins 23-36 upside are 12V
Pins 1-13 (or 17) downside are 12V Return/ground
View all Images in thread
Last edited by Rodizio; May 02, 2012 at
. Reason: found out how to start the PSU