View Single Post
Old Feb 24, 2012, 09:01 AM
planex is offline
Find More Posts by planex
planex's Avatar
Australia, VIC
Joined Jun 2011
1,526 Posts
Originally Posted by ukarmy04 View Post

I was flying my skyfun with the recommended Turnigy Motor, a 6x4 prop, a 3s Lipo rated at 30C and I was using all of this with the HK 50A RedBrick. At the end of my WOT flights, the motor and esc would come down cool to the touch. I would say if you are going to eventually move into 4s batteries, it may be best for you to purchase a bigger ESC.
Thank you I am thinking the same thing
I think the 60a with an 80a burst would be a safer option
Most of the 50a only seem to burst to around 55a
Will be working too hard all the time, to close to its limits

Originally Posted by Rich in ILM View Post
I use these all the time and they are in the states:

80 amp burst current and tough as nails. Same as theTurnigy Plush Hobby Wing family and use the cheap program card if needed

That's great, thanks for that!
This ESC looks like the way to go, 80a burst is plenty
6x4 on 3s will be way under 60a, and 5.5x4.5 on 4s should be around the 50a mark?
Won't be working overtime!
planex is offline Find More Posts by planex
Reply With Quote