View Single Post
Old Feb 20, 2012, 11:23 AM
Kevin Greene is offline
Find More Posts by Kevin Greene
Registered User
United States, TN, Jackson
Joined Mar 2007
4,277 Posts
I was getting my Sabre ready to fly this afternoon on my "lunchbreak... " @ work....First thing that I noticed is that this model is VERY tail heavy with the supplied battery...DO NOT try to fly this model without making sure the model balances!!!...In other words for you beginners out there---Don't assume that the model will have the correct CG with the supplied battery and fly out of the box!!!

Next, I connected up the AnyLink to my JR 9503 TX and the mapping of the servos is wrong...The throttle is on the elevator channel, ailerons are on the throttle channel, and the elevators are on the aileron channel...The AnyLink instructions talk about re-mapping the RX but I'm going to just do the easy thing by unplugging the servos and re-connecting them in their proper sockets...

Kevin
Kevin Greene is offline Find More Posts by Kevin Greene
Reply With Quote