Originally Posted by livonia bob
I had no problem at all I just unsoldered the wires that were there and soldered mine on to the same spot. Was even easier than doing up the Hyperion's as the tabs already had solder on them.. Yours didn't have solder holding the wires to the tabs??
They have changed them it seem. Mine were spot welded on very
long tabs. I cut the tabs (my first mistake I guess) since I don't like long tabs. So I had nothing left to solder on other than bare tabs. That's a good news!
Yes, there was a bit of solder on the wire, but that was on a piece of metal, that was spot welded to the tab themselves (adding resistance) and rolled down. That was too messy for me!