View Single Post
Old Feb 17, 2012, 05:45 PM
moab is offline
Find More Posts by moab
Registered User
Joined Mar 2008
149 Posts
Post #3's instructions are for the #11. Not the Jumbo. As they refer to a "small button". My Jumbo does not have a "small button". They are all of equal size.

"Taking pictures and stills:

A quick press of the power button turns the camera on, and shortly after the LED lights it will blink once. It's in movie mode, this is default when it's powered up.
A quick press of the small button will start recording a movie, the LED will flash a few times then go dark while it records. Quick press the small button again, and it stops recording and the LED comes on again. It's still in movie mode, and you should be able to record another movie.
While it's in movie mode (and not recording), quick press the larger power button to switch to picture mode. It will blink the LED once to confirm that it changed modes. Now a quick press of the small button takes a picture, and the LED blinks once when it takes it. (I say blinks, it goes dark for about 1/2 a second)
You can now quick press the large button to go back to movie mode, or hold down the large button until the LED switches off the turn the camera off."

Thank you for the Chinese version. We misplaced ours.

We'll have to transcribe Techmoans video to have it make sense.

moab is offline Find More Posts by moab