View Single Post
Old Apr 16, 2004, 09:15 PM
jeboba
jeboba
Guest
n/a Posts
Re: Curtek Lights - Strobe - Warning and Nav lights for RC

It's only $50! Not bad!

"Pat" <Pat@clara.net> wrote in message
news:VzXfc.29127$2Z6.1188125@news20.bellglobal.com ...
> How much does this all cost?
> "S.C. Tailor" <myjollypoppers@yahoo.com> wrote in message
> news:54346e32.0404161229.6878b6a9@posting.google.c om...
> > I have recently installed a Curtek lighting system (www.curtek.com) in
> > my latest bash, and I would like to share my experience. This heart
> > of this system is a small, durable controller board with 3 channels
> > with multiple connections for each channel (*continuous current,
> > *strobe, and *remotely triggered continuous current). The remotely
> > triggered output works by using any channel of your reciever,
> > typically the throttle, to activate a continuous current the lighting
> > controller. This channel can also be used to activate a micro relay
> > to control anything you can image. One perfect application would be
> > to hook the retracts to the landing light channel.
> >
> > In Action: This system is absolutely striking and mesmerizing to
> > experience. The 'Learjet Combo' features 9 lights that closely mimic
> > the full scale lights of jet airliners. The lights are extremely
> > bright and have an obtuse viewing range with extreme visibility toward
> > the 60^ of light deflection- except for the very narrow landing lights
> > which are like little spot lights. The wiring is tight and the
> > connections are very clean and solid.
> >
> > I recommend the Curtek lighting system to anyone who is interested in
> > running lights. The lights can extend visibility in daylight too.
> >
> > Curtek's weak point is communication and order processing- which
> > should improve in time. Emails typically take a few days to be
> > answered, and your order may take 4 or more business days to ship. If
> > you order from Curtek, expect this and you will not be disapointed.
> > The kits are custom made, which takes time, but your order will get
> > processed. I will install one of these systems in every kit that I
> > build from now on.
> >
> > S. Tailor

>
>