View Single Post
Old Jan 30, 2012, 11:12 PM
SeismicCWave is online now
Find More Posts by SeismicCWave
Registered User
Hawaii
Joined Feb 2003
5,987 Posts
Quote:
Originally Posted by brianshell View Post
I know this is a dumb question (you guys have been ridiculously patient answering my dumb questions)... But I ordered some Graupner props to put on my XAircraft Hexa w/ the XA motors.

What prop adapter do I buy so make this work?

These props: http://www.mikrokopter.us/shop/index...product_id=245

These motors: http://www.cnchelicopter.com/servlet...s-P1001/Detail

Or will they just fit? The XA has an odd-shaped fit, which is why I'm asking. =)
The shaft on the motor looks really hard to find a proper adapter. The shaft is 4 mm but the hub on the Graupner prop is 8 mm. So you need to get a prop adapter that will fit on a 4 mm shaft with a 8 mm shaft for the propeller. You probably have to cut the shaft on the motor so the prop adapter won't be so high. If you have a machine shop near by I will just get the shaft changed.
SeismicCWave is online now Find More Posts by SeismicCWave
Reply With Quote