View Single Post
Old Jan 29, 2012, 01:53 PM
yzguy is offline
Find More Posts by yzguy
Registered User
yzguy's Avatar
Florida
Joined Mar 2007
1,046 Posts
I tried to get the stock code, compile it, and burn it, and I am still getting errors, any ideas?


C:\Documents and Settings\Owner\Desktop\Mark\GOSDNew>cd C:\Documents and Setting
s\Owner\Desktop\Mark\G-OSD\G-OSD

C:\Documents and Settings\Owner\Desktop\Mark\G-OSD\G-OSD>rem avrdude.exe -p m88
-c usbasp -U flash:w:"cl-osd.hex":a -U eeprom:w:"cl-osd.eep":a

C:\Documents and Settings\Owner\Desktop\Mark\G-OSD\G-OSD>avrdude.exe -p m88 -c u
sbasp -U flash:w:"cl-osd.hex" -U eeprom:w:"cl-osd.eep" -F

avrdude.exe: warning: cannot set sck period. please check for usbasp firmware up
date.
avrdude.exe: AVR device initialized and ready to accept instructions

Reading | ################################################## | 100% 0.02s

avrdude.exe: Device signature = 0x1e930f
avrdude.exe: Expected signature for ATMEGA88 is 1E 93 0A
avrdude.exe: NOTE: FLASH memory has been specified, an erase cycle will be perfo
rmed
To disable this feature, specify the -D option.
avrdude.exe: erasing chip
avrdude.exe: warning: cannot set sck period. please check for usbasp firmware up
date.
avrdude.exe: reading input file "cl-osd.hex"
avrdude.exe: input file cl-osd.hex auto detected as Intel Hex
avrdude.exe: ERROR: address 0x2010 out of range at line 513 of cl-osd.hex
avrdude.exe: write to file 'cl-osd.hex' failed

avrdude.exe: safemode: Fuses OK

avrdude.exe done. Thank you.


C:\Documents and Settings\Owner\Desktop\Mark\G-OSD\G-OSD>pause
Press any key to continue . . .
yzguy is offline Find More Posts by yzguy
Reply With Quote