View Single Post
Old Jan 28, 2012, 10:28 PM
yzguy is offline
Find More Posts by yzguy
Registered User
yzguy's Avatar
Florida
Joined Mar 2007
1,046 Posts
I also made a current sensor, not sure how well this works, as now I can't burn to my OSD, but here is what I used:

3.3V voltage regulator
part number 497-1532-1-ND
http://search.digikey.com/us/en/prod...32-1-ND/592050

25 amp current Sensor
620-1371-1-ND
http://search.digikey.com/us/en/prod...1-1-ND/2470595

.1uv cap
490-5401-ND
http://search.digikey.com/scripts/dk...ds=490-5401-nd

10 mm heat shrink
http://www.hobbyking.com/hobbyking/s...dProduct=10433

jst connectors
http://www.hobbyking.com/hobbyking/s...idProduct=9630
http://www.hobbyking.com/hobbyking/s...idProduct=9631

some red and black wire, and 2 pin connectors I had from something else, could also use servo connectors, and just use 2 of the 3.
yzguy is offline Find More Posts by yzguy
Last edited by yzguy; Dec 01, 2013 at 10:59 PM.
Reply With Quote